Flooring & Industrial Systems
Shows four fixed systems for industrial and commercial floors: self-levelling, anti-slip, epoxy paint or UV-protective PU topcoat, all over a common epoxy primer.
System summary
On industrial floors, no single coating meets every service condition. After surface preparation and the common KR-EPA-105 primer layer, one of the following systems is selected: smooth self-levelling, anti-slip, epoxy paint or UV-resistant aliphatic PU-protected.
Application
Steps are listed in application order. For consumption, layer thickness and waiting times, refer to the products' current technical data sheets (TDS).
Check the concrete's strength, moisture, cracks and contamination. Create a sound, open-pored surface using a suitable mechanical method.
Apply KR-EPA-105 TECHNO KRAFT 2K EPOXY PRIMER before the selected system.
Choose the appropriate one of the four fixed cards: smooth self-levelling, anti-slip, epoxy paint or UV-protective PU topcoat.
Do not change the product order; follow each product's current technical data sheet for mixing, waiting times and coat thicknesses.
The coating must not be opened to traffic or chemical load before it has gained the required mechanical and chemical resistance.
System options
Each option is a complete whole with its own products; products from different options are not combined in a single system.
System 1
In areas requiring a smooth, seamless, self-levelling epoxy surface, KR-EPS-202 is applied over the common KR-EPA-105 primer.
Used when a smooth, seamless and professional self-levelling epoxy finish is required.
Coating thickness, concrete moisture and service load are verified on a project-specific basis.
System 2
In industrial areas where the aim is to reduce the risk of slipping, KR-EPB-302 is applied over KR-EPA-105.
Considered in areas where surface texture and slip resistance matter more than a smooth surface.
The required degree of slip resistance and the cleaning method are determined according to the project's use.
System 3
On surfaces requiring a smooth, easy-to-clean epoxy paint finish, KR-EPB-402 is applied over KR-EPA-105.
Considered on industrial or commercial floors where an epoxy paint system is preferred over self-levelling.
The number of coats, consumption and chemical load conditions are verified against the current technical data sheet and project requirements.
System 4
On surfaces requiring UV resistance and colour stability, the epoxy primer and main coating are protected with the aliphatic KR-PUB-506 topcoat.
Considered in areas where the epoxy system will be exposed to UV and the aim is to reduce the risk of yellowing.
The product order on this card cannot be changed; outdoor and traffic conditions are verified with technical approval.
Products
The systems are shown in order: self-levelling system KR-EPA-105 + KR-EPS-202; anti-slip system KR-EPA-105 + KR-EPB-302; epoxy paint system KR-EPA-105 + KR-EPB-402; UV-protective system KR-EPA-105 + KR-EPB-402 + KR-PUB-506.
The products below are common to all system options; option-specific products are listed on their own cards.
Explore other solutions or application guides linked to this system.
Share your traffic, slip-resistance, chemical load and UV conditions; select the right fixed system with the technical team.
