Tile & Cladding Systems
Ready-to-Use Paste Indoor Tile Installation System
Shows the KR-8700 KRAFT PRO READY system for dry indoor applications requiring a ready-to-use paste-type adhesive with no mixing.
System summary
- Surface check
- KR-8700
- ceramic or wall tile
- KR-200 grout.
Open, apply, place the tile
KR-8700 is a ready-to-use paste-type adhesive that eliminates the step of adding water and preparing a mix on site. The system offers a practical and clean application flow on suitable dry indoor surfaces.
System advantages
- Direct use without preparing a mix
- Practical and tidy application flow
- Simple product system completed with KR-200
Application
How does the system work?
Steps are listed in application order. For consumption, layer thickness and waiting times, refer to the products' current technical data sheets (TDS).
-
Step 1: Prepare the surface
Make the dry indoor surface clean, sound, flat and suitable for bonding.
-
Step 2: Apply KR-8700 directly
Spread the ready-to-use KR-8700 on the surface with a suitable trowel without mixing.
-
Step 3: Place the ceramic or wall tile
Place the tile into the adhesive bed within the open time and check its alignment.
-
Step 4: Complete the joints with KR-200
Once the adhesive has gained sufficient strength, fill the dry indoor joints with KR-200 FUGA KRAFT FLEX.
Products
Recommended KraftBau products
In this system, only KR-8700 KRAFT PRO READY D2TE is shown as the main adhesive. The standard dry indoor grout is KR-200.
Related content
Explore other solutions or application guides linked to this system.
Explore the ready-to-use adhesive
Access the KR-8700 and KR-200 product cards for your dry indoor project or get technical support.